4pcs Rhinestone Sheet Iron On Transfer Cherrykitten

-Materials: Rhinestone
-Size: 12x16cm/4.7''*6.3''
-Rhinestone size: 2mm,4mm mixed
-Wide Application: Suitable for daily DIY, clothing, hats, bags, shoes, trousers, headdresses and other decorations.
-Package: Rhinestone Sheet*4

IMORTANT SHIPPING NOTE
To prevent damage during transit, this rhinestone sheet will be cut into smaller pieces before shipping.
This does not affect the use or quality of the product.

HOW TO APPLY 
Option A: The Classic Iron Method (Best for maximum hold)
1:Prep: Lay your garment flat on a hard, heat-resistant surface. Preheat your iron to 140–160°C (284–320°F). No steam!
2.Peel: Place the design face-down and carefully peel off the white paper backing. The rhinestones should stay stuck to the clear plastic sheet. (Tip: If a stone shifts, just nudge it back into place with tweezers or your fingers!)
3.Position: Flip it over and place the clear sheet onto your garment, rhinestone-side down.
4.Press: Press the iron firmly and evenly onto the transfer sheet for 15+ seconds. Keep it steady—do not move the iron back and forth.
5.Check & Cool: Lift one corner gently to check if the stones are set. Let it cool for a moment and give them a soft touch. If any stones aren't fully stuck, put the plastic back down and re-press that spot.
6.Reveal: Once everything is secured and cooled completely, peel off the clear plastic sheet. Voila!

Option B: The No-Iron Hairdryer Hack (Easy & convenient)
Don't have an iron? No problem! Follow steps 2 & 3 to position your design. Then, place a thin towel directly over the clear transfer sheet. Set your hairdryer to its highest heat setting and blow hot air closely over the towel for a few minutes until the glue underneath melts and adheres. Check and peel as usual!

CARE INSTRUCTIONS
Hand wash only to keep those crystals sparkling.
Always turn the garment inside out (rhinestones facing inward) before washing to protect the design.